Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

High performance, fast setting, mould-resistant and water-repellent grout from the world’s largest manufacturer of adhesives, grouts, sealants and specialty products for the building industry. Grouting materials with an uneven surface where it would be difficult to apply and clean traditional epoxy mortar. ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products.

You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. Look no further than Mapei Ultracolour Plus, a quick-setting and fast-drying cementitious mortar perfect for grouting joints up to 20mm wide. An exceptionally high-performing Grout, Very fast at drying and setting, It is Polymer Modified and Anti Efflorescence. UltraCare Fuga Fresca is a water-based polymeric, acrylic resin-based paint which, thanks to its special characteristics and excellent covering qualities, allows joints with a uniform colour to be produced with lower water absorption that are easy to clean. Therefore, while we strive to use commercially acceptable means to protect your personal information, we cannot guarantee its absolute security.Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth.

Even if it already seems clean after passing over the surface with a rubber float, always clean the surface using a Scotch-Brite® pad and water, to emulsify traces of resin on the surface which could otherwise modify the final surface finish. Grouting industrial floor tile finishes (galvanizing plants, tanneries, battery rooms, paper works, etc.

If the product is used on terracotta floors or on stone material with a porous, absorbent surface, it must only be applied on the joints to avoid staining the tiles. Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Available in 10 popular colours, these handy 5kg bags are the perfect size and cover approximately 8-10 sqm each.

Carry out grouting only on substrates which are sufficiently dry or have been waterproofed, to avoid a whitish film forming on the surface. If using this grout with moisture sensitive natural stone tiles, a low modulus silicone is advised – Mapei Mapesil LM Silicone. The refund will be processed within 3-5 working days following our receipt of the re-saleable items. Finishing: When the mix loses its plasticity and becomes opaque, which usually takes place after 15-30 minutes, clean off the excess Ultracolor Plus with a hard, damp sponge (e. Only use Keranet on surfaces which are resistant to acid, and never use it on marble or limestone material.Also suitable for acid-resistant bonding and rapid setting of ceramic tiles, stone materials, fibre-cement, concrete and any other building material on all types of substrates normally used in construction. Make the most of your new tiles by opting for the best grout around - Mapei Ultracolor Plus, a high-performance, quick setting grout available in all manner of colours!

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Now the big question, do I like it now its down, honestly I'm not sure, it goes on a lovely deep blue but dries quite light and maybe a little luminous, not like the colour expected. The driver will NOT be able to assist in getting the tiles into your property due to insurance purposes. Some application examples UltraCare Fuga Fresca is used to eliminate irregularities in the colour of grout-joints caused, for example, by incorrect application of the mortar, or to eliminate unsightly stains caused during use. Kerapoxy CQ may also be used to grout unglazed klinker, stone, polished porcelain or porcelain in contrasting colours.

Acid-resistant bonding of tiles (used as an adhesive in compliance with class R2 specification according to EN 12004 standard). Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Do not use on epoxy grouts or on expansion joints sealed with silicone or polyurethane-based products.